SIGNAL CONDITIONERS Isolated Signal Conditioner Rack Mount Type【84】

Used to fill unused slots in the RC4000 chassis. No successor model.

I/O adapter used to connect to the output connectors for RC4100 without any signal conditioning

Accepts millivolt signals from a thermocouple, performs cold junction compensation, amplification and linearization, and provides two mutually isolated DC output signals.

Supplies constant current to RTD, performs cold junction compensation, amplification and linearization of its millivolt input signals, and provides two mutually isolated DC output signals.

Amplifies millivolt signals from sensors or other devices and converts them into two mutually isolated DC output signals.

Converts high-level DC input signals into two mutually isolated DC output signals.

Compares the levels of DC current or voltage signals with two set-points and outputs two independent isolated relay contact closure signals.

Powers a two-wire transmitter and converts its 4 to 20mA signals into two mutually isolated DC output signals.

Amplifies pulse input signals, shapes these pulses, and converts them into two mutually isolated pulse output signals.

Supplies constant current to potentiometric sensors, amplifies the millivolt signals, and converts them into two mutually isolated DC output signals.

Converts high-level DC input signals into two mutually isolated DC output signals.

Powers a two-wire transmitter, compares its 4 to 20mA signals with two set-points and outputs two independent isolated relay contact closure signals.

Accepts commercial AC power and provides 24V DC power for the MS4100 series signal conditioners.

Rack for the MS4100 series signal conditioners

Rack for the MS4100 series signal conditioners

Rack for the MS4100 series signal conditioners

Rack for the MS4100 series signal conditioners

Cable assembly for the RC4100 I/O connectors

Used to fill unused slots in the RC4100 chassis.

Supplies constant current to 3-wire RTD, performs cold junction compensation, amplification and linearization of its millivolt input signals, and provides two-wire DC current signals (4 to 20mA) for standard DC drive.

Amplifies millivolt signals from sensors or other devices and converts them into 4 to 20mA output signals.

Measures a pneumatic signal with a semiconductor pressure transducer and converts it into 4 to 20mA output signals.

I/O adapter used to connect to the output connectors for RC2300 without any signal conditioning. Successor model:MS4100-TB

Accepts millivolt signals from a thermocouple, performs cold junction compensation, amplification and linearization, and provides DC output signals. Successor model: MS3701 or MS4101

Supplies constant current to RTD, performs cold junction compensation, amplification and linearization of its millivolt input signals, and provides DC output signals. Successor model:MS3702 or MS4102

Amplifies millivolt signals from sensors or other devices and converts them into commonly used DC signals. Successor model: MS3703 or MS4103

Converts high-level DC input signals into DC output signals. Successor model: MS3704 or MS4104

Compares the levels of DC current or voltage signals with two set-points and outputs two independent isolated relay contact closure signals. Successor model: MS3705 or MS4105

Supplies excitation voltage to strain-gauge type pressure sensors, load cells and the like, amplifies the millivolt input signals, and converts them into DC output signals. Successor model: MS3706

Powers a two-wire transmitter and converts its 4 to 20mA signals into commonly used DC signals. Successor model: MS3707 or MS4107