MS3700 SeriesMS3714
Plug-in Type
Limiter
SIGNAL CONDITIONERS Isolated Signal Conditioner:Function Function Modules【38】
- Isolated Signal Conditioner：Function Modules：Limiter
-
|
Converts DC current or voltage signals into commonly used DC signals and limits the outputs to force them to fall within the range between user-defined upper and lower limits. |
50,000Yen / 60,000Yen |
4Days
|
7Years |
-
RoHS10
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 24 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response Time85ms max. |
- Isolated Signal Conditioner：Function Modules：First-order Delay Signal Conditioners
-
MS3700 SeriesMS3716
Plug-in Type
First-Order Delay Signal Conditioner
|
Adds a first-order delay to DC current or voltage signals and converts them into commonly used DC signals. |
42,000Yen / 52,000Yen |
4Days
|
7Years |
-
RoHS10
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 24 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response TimeDependent on the set value. |
- Isolated Signal Conditioner：Function Modules：Filter Units
-
MS3700 SeriesMS3719
Plug-in Type
Filter Unit
|
Filters voltage input signals with preset filter characteristics. |
120,000Yen |
6Days
|
7Years |
-
RoHS10
|
Input+/-10V range Output 1+/-10V range Response TimeDependent on the set value. |
- Isolated Signal Conditioner：Function Modules：High/Low Signal Selector
-
MS3700 SeriesMS3725
Plug-in Type
High/Low Signal Selector
|
Selects the higher or lower of two input signals and converts it into commonly used DC signals. |
50,000Yen / 60,000Yen |
4Days
|
7Years |
-
RoHS10
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 24 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response Time85ms max. |
- Isolated Signal Conditioner：Function Modules：Signal Selector
-
MS3700 SeriesMS3727
Plug-in Type
Signal Selector
|
Slim, plug-in signal selector that switches between two input signals by switching input. |
60,000Yen |
4Days
|
7Years |
-
RoHS10
|
InputCurrent signal, current signal (shunt resistor 50Ω), voltage signal Output 1Equivalent to the input signal level, input signal x shunt resistor 50Ω, equivalent to the input signal level Response Time5ms max. |
- Isolated Signal Conditioner：Function Modules：Tacho-generator Transmitter
-
MS3700 SeriesMS3728
Plug-in Type
Tacho-Generator Transmitter
|
Converts voltage signals from a tacho-generator into commonly used DC signals. |
45,000Yen / 55,000Yen |
4Days
|
7Years |
-
RoHS10
|
Input0 to 50ｍV, 0 to 1V, 0 to 200V AC, and others; input frequency: 15Hz to 1kHz Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 24 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response Time450ms max. |
- Isolated Signal Conditioner：Function Modules：Manual Setter
-
MS3700 SeriesMS3738
Plug-in Type
Manual Setter
|
Allows users to set a desired output value with the front-accessible switches. |
60,000Yen / 70,000Yen |
4Days
|
7Years |
-
RoHS10
|
Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 24 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others |
- Isolated Signal Conditioner：Function Modules：Reverser
-
MS3700 SeriesMS3740
Plug-in Type
Signal Reverser
|
Converts DC current or voltage signals into DC signals inversely proportional to those signals. |
32,000Yen / 42,000Yen |
4Days
|
7Years |
-
RoHS10
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 24 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response Time85ms max. |
- Isolated Signal Conditioner：Function Modules：Analog Memories
-
MS3700 SeriesMS3766
Plug-in Type
Analog Memory
|
Holds an output signal using external hold input. |
47,000Yen |
4Days
|
7Years |
-
RoHS10
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response Time400ms max. |
- Isolated Signal Conditioner：Function Modules：Analog Memories
-
MS3700 SeriesMS3766H
Plug-in Type
Analog Memory (Multi-Function Model)
|
Holds an output signal using external hold input. (with LED indicators) |
57,000Yen |
4Days
|
7Years |
-
RoHS10
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response Time400ms max. |
- Isolated Signal Conditioner：Function Modules：PWM Converter
-
MS3700 SeriesMS3782
Plug-in Type
PWM Converter
|
Converts DC current or voltage signals into PWM signals. |
57,000Yen / 67,000Yen |
4Days
|
7Years |
-
RoHS10
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 1TTL level, open collector, voltage pulse Output 2TTL level, open collector, voltage pulse Response Time1s max. |
- Isolated Signal Conditioner：Function Modules：High Current Output Signal Conditioner
-
MS3700 SeriesMS3786
Plug-in Type
High-Level Signal Conditioner (High Current Output Model)
|
Converts DC current or voltage signals into high DC current signals. |
180,000Yen |
4Days
|
7Years |
-
RoHS10
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 1Specify within the range of -320 to 320mA. Response Time160ms max. |
- Isolated Signal Conditioner：Function Modules：Insulation Resistance Monitor
-
MS5300/MS5400 SeriesMS5385
Plug-in Type
Insulation Resistance Monitor
|
Continuously monitors the insulation resistance of an inactive motor and indicates the insulation status at three levels: GOOD, ALARM, and FAILURE. |
96,000Yen |
4Days
|
7Years |
-
RoHS10
|
InputAC 100/110V (50/60Hz), AC 200/220V (50/60Hz) Output 1Relay contacts (250V AC 1A, 24V DC 1A） Output Timer Time60 to 90s (fixed) |
- Isolated Signal Conditioner：Function Modules：Square-root Extractors
-
MS5500 SeriesMS5513
Plug-in Type
Square-Root Extractor
|
Extracts the square roots of DC current or voltage signals and converts them into commonly used DC signals. |
46,000Yen |
4Days
|
7Years |
-
RoHS10
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response Time120ms max. |
- Isolated Signal Conditioner：Function Modules：Limiter
-
MG SeriesMGC
Plug-in Type
Limiter
|
Converts DC current or voltage signals into commonly used DC signals and limits the outputs to force them to fall within the range between user-defined upper and lower limits. |
|
|
14Days
|
1Years |
-
-
|
Input4～20ｍA 0～20ｍA 0～10mV 1～5V 0～10V ±10V 0～5V 0～1V Output 14～20ｍA 1～5V Response Time500ms max. |
- Isolated Signal Conditioner：Function Modules：Limiter
-
MG SeriesMGCW
Plug-in Type
Limiter
|
Converts DC current or voltage signals into commonly used DC signals and limits the outputs to force them to fall within the range between user-defined upper and lower limits. |
|
|
14Days
|
1Years |
-
-
|
Input4～20ｍA 0～20ｍA 0～10mV 1～5V 0～10V ±10V 0～5V 0～1V Output 14～20ｍA 1～5V Output 24～20ｍA 1～5V Response Time500ms max. |
- Isolated Signal Conditioner：Function Modules：High/Low Signal Selector
-
MG SeriesMGH
Plug-in Type
High/Low Signal Selector
|
Selects the higher or lower of two input signals and converts it into commonly used DC signals. |
|
|
14Days
|
1Years |
-
-
|
Input4～20ｍA 0～20ｍA 0～10mV 1～5V 0～10V ±10V 0～5V 0～1V Output 14～20ｍA 1～5V Response Time500ms max. |
- Isolated Signal Conditioner：Function Modules：First-order Delay Signal Conditioners
-
MS3900 SeriesMS3916
Chassis Mount Type
First-Order Delay Signal Conditioner
|
Converts DC current or voltage signals into commonly used DC signals. |
35,000Yen |
6Days
|
7Years |
-
RoHS10
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 11 to 5V, 0 to 5V, 0 to 10V Output 21 to 5V, 0 to 5V, 0 to 10V, 4 to 20mA Response TimeDependent on the set value. |
- Isolated Signal Conditioner：Function Modules：Filter Units
-
MS3900 SeriesMS3919
Chassis Mount Type
Filter Unit
|
Filters input signals with preset low-pass filter characteristics. |
35,000Yen |
6Days
|
7Years |
-
RoHS10
|
Input+/-10V range Output 1+/-10V range |
- Isolated Signal Conditioner：Function Modules：First-order Delay Signal Conditioners
-
MS2900 SeriesMS2916
Chassis Mount Type
First-Order Delay Signal Conditioner
|
Converts DC current or voltage signals into commonly used DC signals. |
35,000Yen |
6Days
|
3Years |
-
-
|
Input4 to 20mA, 1 to 5V, 0 to 10V, 0 to 5V, and others Output 11 to 5V, 0 to 5V, 0 to 10V Output 21 to 5V, 0 to 5V, 0 to 10V, 4 to 20mA Response TimeDependent on the set value. |
- Isolated Signal Conditioner：Function Modules：Square-root Extractors
-
MS4000 SeriesMS4013
Rack Mount Type
Square-Root Extractor
|
Extracts the square roots of high-level DC input signals and converts them into two mutually isolated DC output signals. Successor model: MS3713 |
|
50,000Yen / 70,000Yen |
45Days
|
3Years |
-
-
|
Input4 to 20mA, 1 to 5V, 0 to 10V, 0 to 5V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, 0 to 5V, and others Output 24 to 20mA, 1 to 5V, 0 to 10V, 0 to 5V,and others Response TimeApprox. 2Hz-3dB (63%: 0.1s) |
- Isolated Signal Conditioner：Function Modules：Limiter
-
MS4000 SeriesMS4014
Rack Mount Type
High-Level Signal Conditioner with Limiter
|
Converts DC current or voltage signals into commonly used DC signals and limits the outputs to force them to fall within the range between preset upper and lower limits. Successor model: MS3714 |
|
45,000Yen / 65,000Yen |
45Days
|
3Years |
-
-
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 11 to 5V, 0 to 1V, 0 to 5V, 0 to 10V, 4 to 20mA, and others Output 21 to 5V, 0 to 1V, 0 to 5V, 0 to 10V, 4 to 20mA, and others Response TimeApprox. 2Hz-3dB (63%: 0.1s) |
- Isolated Signal Conditioner：Function Modules：First-order Delay Signal Conditioners
-
MS4000 SeriesMS4016
Rack Mount Type
First-Order Delay Signal Conditioner
|
Converts high-level DC inputs into two mutually isolated first-order-delay DC outputs with an adjustable time constant between 0.2 and 20s. Successor model: MS3716 |
|
65,000Yen / 85,000Yen |
45Days
|
3Years |
-
-
|
Input4 to 20mA, 1 to 5V, 0 to 10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 24 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Response Time |
- Isolated Signal Conditioner：Function Modules：Electromotive Force Generator
-
MS4000 SeriesMS4026
Rack Mount Type
Electromotive Force Generator
|
Accepts standard process signals and provides millivolt signals proportional to the electromotive force of the thermocouple specified. No successor model. |
|
59,000Yen |
45Days
|
3Years |
-
-
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 1Thermocouple types: K. E, J, T, B, and others Output 2None Response TimeApprox. 2Hz-3dB (63%: 0.1s) |
- Isolated Signal Conditioner：Function Modules：Current Sinkers
-
MS4000 SeriesMS4027
Rack Mount Type
Current Sinker
|
Accepts standard process signal and provides a 4 to 20mA current loop output using externally applied voltage. No successor model. |
|
65,000Yen |
45Days
|
3Years |
-
-
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA; sinking output Output 2None Response TimeApprox. 2Hz-3dB (63%: 0.1s) |
- Isolated Signal Conditioner：Function Modules：Square-root Extractors
-
MS3800 SeriesMS3813
Chassis Mount Type
Square-Root Extractor
|
Extracts the square roots of high-level DC input signals and converts them into commonly used DC signals. |
|
50,000Yen |
45Days
|
3Years |
-
-
|
Input4 to 20mA, 1 to 5V, 0 to 10V, 0 to 5V, 0 to 1V, and others Output 11 to 5V, 0 to 5V, 0 to 10V Response TimeApprox. 2Hz-3dB (63%: 0.1s) |
- Isolated Signal Conditioner：Function Modules：First-order Delay Signal Conditioners
-
MS3800 SeriesMS3816
Chassis Mount Type
First-Order Delay Signal Conditioner
|
Converts DC current or voltage signals into commonly used DC signals. |
|
65,000Yen |
45Days
|
3Years |
-
-
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 11 to 5V, 0 to 5V, 0 to 10V, +/-10V |
- Isolated Signal Conditioner：Function Modules：Electromotive Force Generator
-
MS3800 SeriesMS3826
Chassis Mount Type
Electromotive Force Generator
|
Accepts standard process signals and provides millivolt signals proportional to the electromotive force of the thermocouple specified. |
|
59,000Yen |
45Days
|
3Years |
-
-
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 1Thermocouple types: K, E, J, T, B, and others Response TimeApprox. 2Hz-3dB (63%: 0.1s) |
- Isolated Signal Conditioner：Function Modules：Current Sinkers
-
MS3800 SeriesMS3827
Chassis Mount Type
Current Sinker
|
Accepts standard process signal and provides a 4 to 20mA current loop output using externally applied voltage. |
|
65,000Yen |
45Days
|
3Years |
-
-
|
Input4 to 20mA, 1 to 5V, 0 to 10V, +/-10V, 0 to 5V, 0 to 1V, and others Output 14 to 20mA; sinking output Response TimeApprox. 2Hz-3dB (63%: 0.1s) |
- Isolated Signal Conditioner：Function Modules：Square-root Extractors
-
MS3200 SeriesMS3213
Unit Type
Square-Root Extractor
|
Extracts the square roots of high-level DC input signals and converts them into two mutually isolated DC output signals. |
|
63,000Yen |
45Days
|
3Years |
-
-
|
Input4 to 20mA, 1 to 5V, 0 to 10V, 0 to 5V, and others Output 14 to 20mA, 1 to 5V, 0 to 10V, 0 to 5V, 0 to 1V, and others Response TimeApprox. 2Hz-3dB (63%: 0.1s) |
- Overview
- Download
- Price
- Standard Lead Time
- Warranty Period
- Standards & Approvals / RoHS
- Power Supply
- Details
- Basic Information
- Compare
